Table of Contents
Advertisement
Menu Timeout: Set your idle timeout duration
preference for the menus.
Standby Mode Led:
functionality of the standby mode LED.
Off the standby mode LED will not light up when the
Display is in standby mode.
Software Upgrade: Ensure that your Display has
the latest software. Press OK to see the current
software version and last update time. The CHECK
UPDATE option will be highlighted. You can start
a manual search for an update by pressing OK.
To do this, your Display should be connected to
the Internet. If any update is found, you can
download and install the new software using the
related options. Follow the on-screen instructions
to complete the process.
Country: The country that was selected during the
initial setup process will be shown.
Auto Display OFF: Set your time preference for the
Display to automatically go into standby mode when
not being operated. This option can be set from 1
to 8 hours in steps of 1 hour. You can also disable
this option by setting to Off.
CEC: Enable or disable the CEC functionality.
Highlight the option of your choice and press OK
to set.
CEC Auto Power On: This function allows the
connected HDMI-CEC compatible device to turn
on the Display and switch to its input source
automatically. Highlight the option of your choice
and press OK to set.
USB Auto Play: Using this option you can set your
Display to start playing the media content installed
on a removable device automatically. Refer to USB
Auto Play Feature section for detailed information.
Device Preferences
About: Check for system updates, change the
device name, restart the Display and view system
information such as network addresses, serial
numbers, versions, etc. You can also view legal
information here.
Date & Time: Set the date and time options of your
Display. You can set your Display to automatically
update the time and date data over the network.
Set corresponding to your environment and
preference. Disable by setting as Off if you want to
manually change the date or time. Then set the
date, time, time zone and hour format options.
Language: Set your language preference.
Keyboard: Select your keyboard type, configure
re- mote controller input method preferences, and
manage keyboard settings.
Enable or disable the
If set to
Sound
System Sounds: System sound is the sound
played when navigating or selecting an item on the
Display screen. Highlight this option and press OK
to turn this function on or off.
Surround Sound: Select your preference for the
surround sound feature. Highlight Select formats
and press OK. Auto, None, and Manual options
will be available. Highlight the option you prefer and
press OK to set.
Storage: View the total storage space status of the
Display and connected devices if available. To see
detailed information on the usage details highlight
and press OK. There will also be options for ejecting
and setting up the connected USB storage devices
as device storage.
Eject: To keep your content safe, eject your USB
storage device before you unplug it from your
Display.
Erase & format (Set up) as device storage: You
can use the connected USB storage device to
extend the storage capacity of your Display. After
doing this, that device will only be usable with the
Display. Follow the on-screen instructions and read
the information displayed on the screen before
proceeding.
Note: Formatting the connected storage device will erase all
data installed on it. Back up the files that you want to keep
before you proceed with formatting the device.
Erase & format (Set up) as removable storage: If
you did priorly format your USB storage device as
device storage, it will only be usable with your
Display. You can use this option to format it again in
order to use it with other devices. Before proceeding
with the formatting, you may consider backing up
the data on your device to your Display's internal
storage or to another USB storage device using the
Back up apps option. Otherwise, some apps may
not work properly after formatting. Follow the on-
screen instructions and read the information
displayed on the screen before proceeding.
Note: Formatting the connected storage device will erase all
data installed on it. Back up the files that you want to keep
before you proceed with formatting the device.
Screen Saver: Set the screensaver and sleep mode
options for your Display. You can choose a screen-
saver, set wait time for the screensaver, set when the
Display goes into sleep mode or start the screensaver
mode.
Location: You can allow the use of the wireless
connection to estimate the location, see the recent
location requests and allow or restrict the listed apps
to use your location information.
Security & restrictions: Using the options of this
menu;
19
Advertisement
Table of Contents
