Table of Contents
Advertisement
Remote Control
Inserting the Batteries into the Remote
Remove the screw that secures the battery
compartment cover on the back side of the remote
control first. Insert two 1.5V - size AAA batteries.
Make sure the (+) and (-) signs match (observe correct
polarity). Do not mix old and new batteries. Replace
only with same or equivalent type. Place the cover
back on. Then secure the cover again with the screw.
Standby Button
Press and hold the Standby button on the remote
control. Power off dialogue will appear on the screen.
Highlight OK and press the OK button. The Display will
switch into standby mode. Press briefly and release to
switch the Display into quick standby mode or to switch
on the Display when in quick standby or standby mode.
1.
Standby: Switches On / Off the Display
2.
Numeric buttons: Enters a number or a letter in
the text box on the screen
3.
Signage: Displays Signage Settings menu
4.
Volume +/-: Increases or decreases the volume
5.
CMS: Launches on board ClevertouchLive
signage application. Scan (QR code we have
provided on the outer box) or visit
https://gettingstarted.clevertouch.com/cm-pro-
getting-started/
6.
Menu: Opens the Display Settings menu
7.
Directional buttons: Helps navigate menus,
content, etc.
8.
Back/Return: Returns to previous screen
9.
Network: Displays Network/Internet Settings
menu
10. Sound: Displays Sound menu
11. HDMI Buttons: Switches to the selected HDMI
input source
12. SET: No function
13. Rewind: Moves frames backwards in media such
as movies
14. Pause: Pauses the media being played
15. Media Player: Launches the media player ap-
plication
16. Play: Starts to play selected media
17. Stop: Stops the media being played
18. Fast forward: Moves frames forward in media
such as movies
19. Freeze: Freezes display content
20. Info: Displays information about on-screen content
21. Picture Mode: Cycles between picture modes
22. Picture: Displays Picture menu
23. Internet: Launches the open browser application
24. Wireless Display: Launches AirServer
application)
25. Exit: Closes and exits from displayed menus or
returns to previous screen
26. OK: Confirms user selections
27. Scheduler: Displays Scheduler Settings menu
28. Brightness +/-: Increases or decreases the bright-
ness of the screen
29. Mute: Completely turns off the volume of the
Display
30. Picture Zoom: Changes the aspect ratio of the
screen
31. Source: Shows all available content sources-
General Use
Use the remote control when navigating through the
menus and performing initial setup process.
Operation with the Remote Control
12
Advertisement
Table of Contents
