Table of Contents
Advertisement
Then define a source for your plan. Highlight the
related option and press the OK button, then set as
desired using the Up/Down directional buttons and
the OK button. If the Last Source option is selected,
the input source will not be changed at the power-
up. If the USB option is selected, the media files on
the connected USB device will be automatically
played back as explained in the USB Auto Play
Feature section.
You can also set a backlight value for your plan.
Highlight the backlight slider and set using the Left/
Right directional buttons. Mind that, in case you set
only the backlight slider, the display will not be turned
on or off, only the backlight values will be changed
at defined time interval. If the source option is set to
Last Source, the backlight settings will be applied
to all sources, otherwise the settings will be applied
to the selected source only.
Highlight Save on the plan setting screen and press
OK to save settings when complete.
Link Options
Press OK to open the Link Options menu screen.
Current Start url and Settings url links will be
displayed. These items are for information only and
not selectable. Refer to the Changing the Start and
Settings URL's section for information on setting these
links. The Open browser initial page and NTP server
link preferences can be configured using the related
options. Highlight the option you want to configure
and press OK.
Open browser initial page: Sets the initial page link
for the open browser.
NTP server: Sets the NTP server link.
Start url: Displays the Start URL link.
Settings url: Displays the Settings URL link.
Volume settings
Volume Limit: Sets the maximum value of the volume.
Volume Limit (Headphone): Sets the maximum value
of the headphone volume.
Startup Volume Enable: Enables or disables the
use of startup volume values which are set in the
Startup Volume Value and Startup Volume Value
(Headphone) menu items. If this option is disabled,
these menu items will be unavailable to be set.
Press
OK to enable or disable the feature.
Startup Volume Value: Sets the startup value of
the volume.
Startup Volume Value (Headphone): Sets the
startup value of the headphone volume.
Fixed Volume Enable: Enables or disables the use
of fixed volume value which is set in the Fixed
Volume Value menu item.
Press OK to enable or
disable the feature.
Fixed Volume Value: Sets the value of the volume
to be fixed.
Headphone Direct Volume: Enables or disables the
control of the headphone volume through remote
control. When this feature is enabled, volume control
buttons will not change the Display's main sound. You
can change the sound of the Display using the Left/
Right directional buttons of the remote control.
OK to enable or disable the feature.
Reset to Default Values
Reset: Highlight this option and press the OK button
on the remote to return the signage menu settings to
factory defaults.
Video Wall Settings
Reset: Resets the settings to factory defaults.
First time installation
Highlight this option and press OK to repeat the initial
setup process and reset the Display's settings to the
factory defaults.
System Settings
Language: Set your OSD menu language preference.
Date & time: Set the date and time options of your
Display.
Automatic date & time: You can set your Display to
automatically update the time and date data over the
network. Turn this option off, if you want to manually
set the date and time.
Set date: Set the date manually.
Set time: Set the time manually.
Set time zone: Set the time zone.
Use 24-hour format: Turn the 24-hour format on
or off.
Sources:
Enable or disable selected source options.
There will be Disabled, Enabled, and Enhanced options
available for HDMI sources, if your Display supports Ultra
HD. The Enabled and Enhanced options are affecting the
colour settings of the selected HDMI source. To be able to
watch 4K images from an HDMI source related source
setting should be set to Enhanced if the connected device is
HDMI 2.0 compatible. Set to Enabled if the connected
device is HDMI 1.4 compatible. Set accordingly or disable
the related HDMI source by setting to Disabled.
Note: HDMI cables which are longer than 5 metres and which are not
HDMI certified can cause display problems. We recommend using
a certified Premium High-Speed HDMI Cable. Source device,
connection cable quality and other HDMI equipments used may
affect performance.
Please refer to → https://www.hdmi.org/resource/cables (for
finding the right cable)
More
Press
18
Advertisement
Table of Contents
