Table of Contents
Advertisement
Press the Back/Return or Exit button to display or
return to the Home Screen. You can navigate through
the elements situated in the centre of the Home
Screen using the remote control buttons. Press the
Right directional button first to start navigating on the
Home Screen with the remote. Press the Menu
button to display the Display Settings menu. Use the
directional buttons to move the focus, proceed, adjust
some settings and press OK to make selections in
order to make changes, set your preferences, enter a
sub-menu, launch an application, etc. Press the Back/
Return or Exit button to return to the previous menu
screen or step, close a menu or exit an application, etc.
Input Selection
Once you have connected external systems to your
Display, you can switch to different input sources.
Press the Source button on your remote control. Use
the directional buttons to highlight a source option
and press the OK button to switch to that source. You
can also use the dedicated HDMI buttons on your
remote (depends on the model) to switch directly to
the selected HDMI input.
Adjusting the Volume and Brightness
You can adjust the volume by using the Volume +/-
buttons and the brightness by using the Brightness
+/- buttons on the remote.
Note: Adjusting the brightness will not affect the picture on
the launcher menu.
You can also adjust the brightness using the
Brightness option in the Display Settings > Picture
menu. Press the Menu button on the remote to display
the Display Settings menu.
Initial Setup
When turned on for the first time, initial setup should be
performed. Follow the on-screen instructions to setup
your Display. The installation wizard will guide you
through the setup process. Use the directional buttons
and the OK button on the remote to select, set, confirm
and proceed. You can use the Back button to go back
to the previous steps and change your selections.
1. Language
The language selection options will be listed on the
screen. Select the desired language from the list and
press OK to continue.
2. Country
In the next step select your country from the list and
press OK to continue.
3. Login
You will be asked to define a PIN at this point. Enter a
PIN twice for confirmation using the virtual keyboard
and then highlight Continue and press OK. You have
to enter this PIN if you are asked to enter a PIN for any
menu operation later. To skip this step highlight Skip
Pin and press OK.
4. Signage Settings
The Signage Settings menu will be displayed next.
The Set ID, OSD Orientation, and NTP server options
can be configured using this menu. The Model name,
Serial number, and Software version options are for
information only. You can save the model information
data of the Display to a connected USB storage
device using the Save model information option. You
can also copy database files from a connected USB
storage device to the Display using the Clone from
USB option. Refer to the Signage Settings section
for more information on the options of this menu. After
the settings are completed, highlight Next and press
OK to continue.
5. Auto Launch
In this step you can set your Auto Launch preference
for the Display. Disabled, CMS, Open Browser.
Select Source, and Select Application options will
be available. This is set to Disabled by default. In this
case, the Display will open with the Home Screen
and then launch AirServer and ClevertouchLive. For
the Select Source and Select Application options
you will have to set the available source or
application of your choice. You can change your
preference any time later using the Auto Launch
option in the Display Settings > Signage Settings
> Power Up Settings menu.
6. Display Operation Mode
The Display Operation Mode selection screen will be
displayed next. For normal operation set the Power
Mode to Reactive. Set to Eco for an energy-efficient
operation. In this mode your Display's settings will be
configured to reduce the energy consumption. Note
that, in Eco mode the UART/LAN Commands will not
work when the Display is in standby mode. Highlight
Next and press OK to continue.
When the initial setup is completed Home Screen will
be displayed. You can repeat the initial setup process
and reset the Display's settings to the factory defaults
anytime using the First time installation option in the
Display Settings > Signage Settings menu. You can
access the Display Settings menu by pressing the
Menu button on the remote.
Note: You will be asked to enter the PIN to perform initial setup.
If you didn't define a PIN during the initial setup, you can use
the default PIN. Default PIN is set to 0000.
Home Screen
After the initial setup, the Display will open with the
Home Screen. You can go to the Display Settings
> Signage Settings > Power Up Settings menu to
change the Auto Launch setting. If it is set to
Disabled, the Display will always open with the Home
13
Advertisement
Table of Contents
