Configure The Screen In Novalct (Loading Scr-Files); Figure 69: Advanced User Login; Figure 70: Entering Password; Figure 71: Interface After Successful Login - NEC FE Series User Manual

7.3

Configure the Screen in NovaLCT (Loading scr-Files)

The software installation package includes a defined Configuration setup. Before you finish the
installation of the LED Wall, you have to configure the Sending cards, the Receiving cards and the
Calibration Settings.
Step 1) Start the software NovaLCT.
Step 2) Click the User(U) register and select Advanced Synchronous System User
Login(A) (see Figure 69).

Figure 69: Advanced User Login

Step 3) Enter the password into the Password field. The default password is admin.
Click the Login button to confirm the entry (see Figure 70). The start screen refreshes
automatically.
Result: If the login is successful, the interface below will appear (see Figure 71).

Figure 70: Entering Password

Figure 71: Interface after Successful Login

56