Getting Started; Info On The Connection Setup; Install Controller Software Novalct - NEC FE Series User Manual

Fine pitch led video display indoor
Hide thumbs Also See for FE Series:
Table of Contents

Advertisement

7

GETTING STARTED

After mounting the LED Wall, check all cable connections and ensure they are connected
according to 15.1 Cable Plans. The cable plans also include the connection between a computer
and the NovaStar Controller.
7.1

Info on the Connection Setup

Warning!
Only trained personnel, such as electricians or NEC personnel, may
connect the internal power supply to mains power supply.
Power input for the LED Wall is provided by connecting the Power bar to the electric power system
of the building. Ensure there is a possibility to switch the power for the LED Wall on and off.
Data input is provided by connecting the Power bar to a NovaStar Controller. The NovaStar
Controller is connected to a content computer, which provides the content data, and to a service
computer, which provides data about how the content is displayed on the screen.
Notice
The NovaStar Controller is no product of NEC DISPLAY SOLUTIONS.
For detailed information on the NovaStar Controller, see the respective manual for
NovaStar Controller MCTRL660 PRO. Download the current version at:
https://www.novastar.tech/download/download-controller/
7.2

Install Controller Software NovaLCT

To configure and check the functions of the controller, you need to install the software NovaLCT.
The software installation package is delivered via USB flash drive.
The software allows you to perform screen configuration, brightness adjustment, calibration,
display control, monitoring, etc. To install the software, follow the steps below:
Step 1)
Connect the delivered USB flash drive to your computer.
Step 2)
Open the USB flash drive.
Step 3)
Navigate to the executable installation file NovaLCT.exe.
Step 4)
Click the NovaLCT.exe file to start the installation of the software.
Step 5)
Follow the instructions of the installation wizard to complete the software installation. If
the firewall prompt appears, allow the installation.
Notice
Deactivate the antivirus software during the installation.
55

Advertisement

Table of Contents
loading

Table of Contents