Table of Contents
Advertisement
4.6 Loading the Configuration File/Configure the Parameters
If the receiving card parameters are already configured, please skip this chapter and perform the
operations in 5.3.4.13 Configuring the Network via ViPlex Express.
4.6.1
Loading the Configuration File via ViPlex Handy (Android only)
Step 1)
Save the receiving card configuration file to mobile device.
Step 2)
Log in to the LED Poster.
Step 3)
Click screen name to enter the Screen management page.
Step 4)
Select Screen Setting, Receiving card configuration to enter the Receiving card
configuration page.
Step 5)
Select the receiving card configuration file and click the Send button.
4.6.2
Loading the Configuration File via NovaLCT-Taurus
Step 1)
Start NovaLCT-Taurus.
Step 2)
Select the System menu button, Search All Display.
Result: The system displays the screen information list.
Step 3)
Click screen information and click Connect System.
Result: The gray button on the page becomes normal.
Step 4)
Select User, Advanced login.
Step 5)
Enter password and click the Login button.
The default password is "admin".
Step 6)
Click the
Step 7)
Confirm whether the local PC has the required receiving card configuration file.
a) Yes: Perform Load Configuration File.
b) No: Please perform Manual Configuration.
Loading the Configuration File
Step 1)
Select Cascading scan board and Load Configuration File.
Step 2)
Click the Browse button to choose a configuration file from the local PC.
Step 3)
Click the Next button to load the configuration file.
Manual Configuration
Step 1)
Select Cascading scan board and click the Next button.
Step 2)
Configure the receiving card parameters based on your actual conditions.
Step 3)
Click the Send To HW button.
Step 4)
Set the parameters based on your actual conditions and click the Send button.
Step 5)
Adjust parameters until the screen displays normally. Click the Save to Screen
button.
Step 6)
(Optional) Click the Save Config File button to back up the receiving card
configuration file to the local PC.
menu button to enter the Screen Config page.
© NEC Corporation 2019
34
Advertisement
Table of Contents
