Draw And Mark The Anchor Positions On Wall; Figure 38: Positions For Anchor Points: 4×4 Frameset; Figure 39: Positions For Anchor Points: 5×5 Frameset; Figure 40: Positions For Anchor Points: 6×6 Frameset - NEC FE Series User Manual

6.1.2

Draw and Mark the Anchor Positions on Wall

 Start from the middle and mark the positions for the anchor points to drill out. (See markings
in figures below or the dimensions in Table 7.)
 Use the spirit level to check the vertical alignment of the marks before drilling.
Figure 38: Positions for Anchor Points: 4×4 Frameset
Figure 39: Positions for Anchor Points: 5×5 Frameset
Figure 40: Positions for Anchor Points: 6×6 Frameset
41