Figure 58: Installing Corner Frame Bottom (Left, Right); Figure 59: Corner Frame Top (Left, Right); Figure 60: Installing Overframe (Top); Figure 61: Installing Overframe (Left, Right) - NEC FE Series User Manual

Step 1) Attach the Corner frame bottom (left, right)
(A) to the Power bar on both sides.
Step 2) If the Pixel cards are already installed:
Place the Overframes (left, right) next to the
edge of the LED Wall.
With the Service tool (Figure 101, p. 76),
remove those Pixel cards that cover the
Screw connection anchors (B) that connect
to the Overframes (left, right).
You need to have access to the Screw
connection anchors (B) from the inside of
the cabinet.
Step 3) Before mounting the Overframes on the LED Wall, assemble the frame on the ground
in front of the LED Wall.
Step 4) Attach the Corner frame top (left, right) to
the Overframe (top) with the pre-installed
screw (D).
Step 5) Attach the Overframes (left, right) to the
Overframe (top) and links with the
pre-installed screw (D)
Step 6) With two people, carefully lift the
Overframes and place it onto the LED Wall.
Step 7) Align the slot nuts in the Overframes with the
Screw connection anchors.
Ensure there is no gap between the
Overframes (left, right) and the Corner frame
bottom (left, right).
A
Figure 58: Installing Corner frame
bottom (left, right)

Figure 59: Corner frame top (left, right)

Figure 60: Installing Overframe (top)

Figure 61: Installing Overframe (left,
right)
B
D
51