Configure The Screen In Novalct (Loading Scr-Files); Figure 72: Advanced User Login; Figure 73: Entering Password; Figure 74: Interface After Successful Login - NEC FA Series User Manual

7.3 Configure the Screen in NovaLCT (Loading scr-Files)

The software installation package includes a defined Configuration setup. Before you finish the
installation of the LED Wall, you have to configure the Sending cards, the Receiving cards and
the Calibration Settings.
Start the software NovaLCT.
Click the User(U) register and select Advanced Synchronous System User
Login(A) (see Figure 72).

Figure 72: Advanced User Login

Enter the password into the Password field. The default password is admin.
Click the Login button to confirm the entry (see Figure 73). The start screen
refreshes automatically.
Result: If the login is successful, the interface below will appear (see Figure 74).

Figure 73: Entering Password

Figure 74: Interface after Successful Login

© NEC Corporation 2019 53