Table of Contents
Advertisement
SAFETY INFORMATION
This message contains information on how to operate TMT250
safely. By following these requirements and recommendations,
you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating
the device!
Limit the use of device in vehicles
Please follow all restrictions. Wireless devices
can interfere with other electronic equipment in
vehicles.
Interference
All wireless devices are sensitive to electromagnetic
interference, as a result wireless devices affect the
performance of each other.
Road safety first
Comply with local traffic laws, always hold your
hands on a steering wheel when using a device.
Your safety is of importance when you drive.
Operate the device in suitable conditions
Do not use the device where mobile connectivity is
forbidden.
Limit the use of device in hospitals
Please follow all restrictions. Turn off the device in
the vicinity of medical devices when required
Be cautious near flammable materials and liquids
Telematics
Charging precautions
SELV LPS chargers, personal computers or laptops
that device will be connected to must comply with
the requirements of IEC 60950:2005 standard.
Use only original batteries
Using uncertified manufacturer or different type
batteries may cause the device to malfunction or
even explode
Use batteries safely
Protect batteries from moisture. Place them in a
cool and dry place when storing. Avoid extensive
operation at high temperatures. Do not attempt
charging battery directly from the electrical mains.
All utilised batteries shall comply with IEC 62133.
Power supplies
Power supply circuits used to charge the device
connection must have safeguards, which prevent
power leakage, short circuits or in- correct electrical
grounding. Any used switches ought to be installed
in a readily accessible location. Power must be
uninterrupted and the distance between the
contacts must be 3 mm or larger.
Other
In order to prevent device from mechanical damage
it is advisable to transport it in a shock–resistant
packaging. If device stopped working properly
regardless of the settings only a qualified specialist
can help. It is recommended to contact your local
seller or your UAB Teltonika manager in such a case.
Use the right screwdriver
In order to prevent device's cover from mechanical
damage it is recommended to use screwdriver,
which is included in the package. Do not use
electrical
screwdrivers.
Quick Manual v1.0 // TMT250
14
Advertisement
Table of Contents
