Bs200 Display - Lacros Scamper S200 User Manual

CE User Manual LACROS 1.9 EN
Additional display options
By pressing the ''S'' or " " button sequentially, you can browse
through various information at the bottom of the display:
(A) Battery voltage (BATTERY)
(B) Total km/miles (ODO)
(C) Trip reading (TRIP)
(D) Cycling time (TIME)
(E) Maximum speed (MAX)
Please note: Trip, Time, and Maximum speed will be
reset by pressing and holding the ''S'' key and the ''–'' key together
for two seconds.
USB port
Below the display, you will find a USB port (A) where, for
example, a phone or navigation device could be charged during
cycling. Charging only works when the display is turned on.

BS200 Display

Turn on the display
Press the "M" button (A) on the left side of the display
to turn on the bicycle's electrical circuit. Note that the
battery should already be powered on. A menu appears
on the display; the electrical circuit is switched on.
(A) On/off button display
(B) Increase motor support and lighting
(C) Decrease motor support
Turn bicycle lights on and off
Hold the "+" button (B) for a few seconds to turn on the
bicycle lights. The lighting sign appears on the display. Hold
the ''+'' button (B) again for a few seconds to turn off the
bicycle lights.
9