The Operation Of The Electrical Support - Lacros Scamper S200 User Manual

CE User Manual LACROS 1.9 EN
Additional display options
By pressing the ''SET'' button sequentially, you can browse through various information at the bottom of the
display: total km/miles mode (ODO), trip reading (TRIP), and cycling time (TIME).
Reset trip reading
Press and hold the "SET" key (B) for a few seconds until another
menu appears. Then press the "–" key (D) once. The trip mode has
now been reset. Press the "SET" button (B) again to return to the
default menu.
USB port
Below the display, you will find a USB port (A) where, for example, a
phone or navigation device could be charged during cycling. Charging
only works when you press and hold the ''SET'' key and the ''+'' key
for two seconds. This will activate the USB port.

The operation of the electrical support

The bicycle functions generally on PAS (pedal assistance) utilizing a magnet-rotation sensor. This means
that the electrical assistance starts when the pedals rotate. In addition, a thumb lever is located on the
handlebar, which can activate the maximum assistance, apart from assistance levels 1 to 9. As long as
the thumb lever has a forward position (during pedal rotation), the motor will give the maximum
assistance, comparable with assistance level 9 on the display.
Support is interrupted when:
- The pedals stop rotating;
- the brakes are being used;
- the thumb lever is released when in use.
12