CE User Manual
Motinova mid-drive motor
Control panel
(A) On/off button display
(B) Increase support (keep pressed
automatic switching between support modes)
(C) Decrease support
(D) Walking assist
(E) Settings
(F) Lighting
Display symbols
(A) Battery capacity
(B) Support mode
(C) Speed indication
(D) Range
(E) Total mileage
(F) Trip reading
(G) Speed unit
(H) Power
(I) Time
(J) Light indication
System time
You can adjust the system time in the following way (the bicycle must be stationary):
1. Press and hold the "Settings" button for longer than 1.5 seconds.
2. In the settings mode, you can press the "+" or "–" key to select "hour" or "minute."
3. To adjust a value, briefly press the "Settings" key. After this, the value of "hour" or "minute"
4. The value can be adjusted with the "+" or "–" key.
5. By pressing the "Settings" button, the change will be saved.
6. After the adjustment, you can exit the settings mode by pressing and holding
than 1.5 seconds
.
two seconds for
for
15
LACROS 1.9 EN
flashes.
Settings" button for more
the "
Need help?
Do you have a question about the Scamper S200 and is the answer not in the manual?
Questions and answers