C500B Display - Lacros Scamper S200 User Manual

CE User Manual LACROS 1.9 EN

C500B Display

Turn on the display
Press the " " button (A) on the left side of the display to turn on
the bicycle's electrical circuit. Note that the battery should already
be powered on. A menu appears on the display; the electrical
circuit is switched on.
(A) On/off button display and lighting
(B) Menu view
(C) Increase motor support
(D) Decrease motor support
Turn bicycle lights on and off
Press the " " button (A) to turn on the bicycle lights. The
lighting sign appears on the display. Press the " " button (A)
again to turn off the bicycle lights.
Thumb lever walking assist
The walking assist is activated by pushing the thumb lever (A)
forward at a standstill, providing support up to 6 km per hour.
(Note: the walking assist via the thumb lever does not work
when the bicycle is in support level "0".) The walking assist will
also be activated when the " " button on the display is
–
pressed for a few seconds
.
Note: when using the thumb lever while cycling, the electrical
support goes directly to its maximum (25km/h).
Switch between the 9 levels of support
The electrical support has 9 levels. These are displayed at the top
left of the display. These 9 levels can be operated by briefly
pressing the "+" (C) and "–" (D) buttons.
11