Godex EZ-4TKP Programing Manual page 9

E, Bit -Mapped font (not included Asia font)
name: The name of the graphic, form and Bit -Mapped font
Description : Able to delete individual files or erase entire flash memory.
Example : ~MDELG,Bus
11. Rotate printing
Syntax : ~Rx
Parameter : x = label width; from 1 to 104 (mm)
Description : Rotate the label format 180-degrees when printing (refer page 18). To return to the original print
direction, set the x value greater than 104 (ie. ~R105).
12. Print the available space and data name in the memory
Syntax : ~Xn
Parameter : n = 1, print label format names and available space in memory.
n = 2, print graphic names and available space in memory.
n = 3, print Bit-Mapped font names and available space in memory.
n = 4, print the name of the label formats, graphics, fonts, and available space in memory.
n = 5, print Asia font names and available space in memory
n = 6, feed back the total printed length through the printer's serial port
Description : Print the available space in the memory card (unit: bytes)
13. Acknowledge from RS-232
Syntax : ~Kn
Pararmeter : n = 0, disable.
n = 1, enable.
Return value : Y?
Description : Acknowledge a "Y(0D0A)" from RS -232 back to host each printing label.
14. Row Offset Adjustment
Syntax : ~Q±n
Pararmeter : n=-36 ~ +36
Return value : none
Description : If the printing doed not appear in the same place on every label, this command instructs the printer
to print label formats +n increments above the position the format specifies, and –n decrements
below the position the format specifies.
; the graphic "Bus" will be deleted
8