Godex EZ-4TKP Programing Manual page 7

^Kname
:
:
E
:
:
~Px
12. Label width setting
Syntax : ^Wxx
Parameter : x=label width (mm)
Description : Label width setting
13. Number of labels per cut
Syntax : ^Dx
Parameter : X = 0 , disable cutting.
X = 1 ~ 32767 , number of label per cut.
Description : Number of labels per cut (refer page 17)
14. Serial Port translation setting
Syntax : ^Yp1.p2,p3,p4
Parameter : p1 : Baud Rate (48 or 96 or 19 or 38) ; 48=4800bps; 96=9600bps; 19=19200bps; 38=38400bps
p2 : Parity (N, O, E) ; N=none parity; O=odd parity; E=even parity
p3 : Number of data bits (7 or 8)
p4 : Number of stop bits (1 or 2)
Description : Serial Port translation setting
15. Set the forward length
Syntax : ^Mx
Paramet er : x = forward length (mm)
Description : Set the forward length of the paper
16. Set the backward length
Syntax : ^Bx
Parameter : x = backward length (mm)
Description : Set the backward length of the paper
data
Control/Setup command [option]
6