Setting Up The Sso Functionality - Distech Controls ECLYPSE ECY-STAT User Manual

Item Description
Type Server type.
Server IP address of the SSO server. This is the IP address of the ECLYPSE controller that was
configured as the server.
Server IP Address
Note: An SSO server must be configured with a static IP address. If the SSO server IP address
changes, you will have to reconfigure all SSO clients with the new IP address. See Ethernet.
Server Https Port Server HTTPS port of the SSO server. By default, this port is set to 443.
Server access token of the SSO server. If the server access token changes, this parameter should be
updated by the user accordingly.
In the Access Token field, enter the access token belonging to the Server. To do so, go to Server
Access Token
Settings, copy the access token using the copy icon
field in Client Settings.
Define a recovery password to access the controller in recovery mode if ever the server is unavailable.
See Single Sign On (SSO)
Recovery Password /
Click the show password icon
Confirm Recovery
Password
password. If so, a factory reset will be required.
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Apply Click Apply to apply and save the changes

Setting Up the SSO Functionality

This section explains how to setup the SSO functionality by setting up the SSO Server first, followed
by the SSO Client. For more information, see
An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to
reconfigure all SSO clients with the new IP address. See Ethernet.
SSO functionality is only available in HTTPS mode. See
Setting up the SSO Server
1. Open a web browser.
2. Enter the IP address of the controller that will become the Server (e.g., 192.168.0.10). The
ECLYPSE Login page is displayed.
3. Enter your credentials to log in. The ECLYPSE home page is displayed.
4. In the Users menu, select the Server Settings tab and make sure the Server Mode is set to On.
ECLYPSE Connected Thermostat (ECY-STAT)
Troubleshooting.
to see the password you are entering.
In order for the recovery to work, we highly recommend you do not forget your recovery
Single Sign On (SSO)
and paste (CTRL+V) into the Access Token
Settings.
Web Server Access for more information on enabling HTTPS.
ECLYPSE Web Interface
63