Sso Server Settings - Distech Controls ECLYPSE ECY-STAT User Manual

SSO Server Settings

The Server Settings tab allows you to select the type of server mode for the Server controller. The
available modes are Single Sign On or Radius Server.
When Type is set to Single Sign On (SSO), the controller will be defined as the SSO Server dedicated
to authentication purposes. Therefore, a single login to the server will authenticate user access to mul-
tiple ECLYPSE controllers that are on the same network.
An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to
reconfigure all SSO clients with the new IP address. See Ethernet.
Figure 46: SSO Server Settings
Item Description
Server Mode (On/Off)
Enable or disable the functionality of the server. When set to OFF, the controller is no longer in server
mode.
Type Server type.
Identifier used by the server that is handling the protected resource to lookup the associated
authorization information.
The access token is usually a long string made up of 16 to 132 random alphanumeric characters and
Access Token
symbols that would be difficult to guess.
When the SSO service is selected, the access token ID is displayed by default. If required, you can
generate a new code using the generate icon
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Apply Click Apply to apply and save the changes
See also Setting Up the SSO
ECLYPSE Connected Thermostat (ECY-STAT)
Functionality.
ECLYPSE Web Interface
or manually enter an access token.
61