Related Manuals for Vanco PulseAudio PAEXARC1
Summary of Contents for Vanco PulseAudio PAEXARC1
- Page 1 ARC DIGITAL AUDIO EXTENDER PAEXARC1 For applications where ARC signals need to be extended above HDMI cabling limitations to an amplifier or distributed audio system. ® Updated: March 2023...
-
Page 2: Safety Instructions
INTRODUCTION The PulseAudio PAEXARC1 is an ARC Digital Audio Extender that allows digital audio to be routed from a display, back to a remote location or amplifier, over a single Cat5e/6 cable up to 492ft (150m). For displays without ARC capability, or when ARC settings are not working as they should, the built-in “ARC Backup Plan”... -
Page 3: Specifications
SPECIFICATIONS Audio Supported Audio Formats PCM 2CH, Dolby/DTS 5.1CH Sample Rates Optical / ARC (492ft / 150m) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz ARC (295ft / 90m) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Connections Input: (1) SPDIF, (1) ARC HDMI In, (1) Micro-USB (Power) ®... -
Page 4: Panel Descriptions
PANEL DESCRIPTIONS Transmitter Panel 1. POWER LED: When the transmitter is receiving power, the LED light will be red. 2. SPDIF/ARC SWITCH: Selects the audio pass-through channel: SPDIF: Digital audio signals are input from the SPDIF IN port of the transmitter ARC: Digital audio signals are input from the HDMI ARC IN port of the transmitter. -
Page 5: Operation
OPERATION HDMI ARC – For Displays and Amplifiers/Soundbars with ARC functionality 1. Connect an ARC equipped display such as an HDTV or HD Projector using the ARC HDMI port of the display to the HDMI input on the Transmitting unit and set the ®... - Page 6 SPDIF Digital Audio 1. Connect an optical audio out port from a display such as an HDTV or HD Projector to the SPDIF IN port on the Transmitting unit, and set the SPDIF/ARC toggle switch to SPDIF. NOTE: Please refer to the displays manual on how to enable or change audio output settings.
-
Page 7: Technical Support
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email technical support issues to techsupport@vanco1.com. When calling, please have the part number, serial number (affixed to the bottom of the unit) and invoice available for reference during the call. -
Page 8: Limited Warranty
LIMITED WARRANTY With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of 2 years from the date of purchase. Should this product, in Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will... - Page 9 NOTES...
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 Please read this instruction manual prior to calling or installing this unit since it will familiarize you with the capabilities of this product and its proper installation. Vanco International, LLC 506 Kingsland Dr., Batavia, IL 60510 Phone: 800-626-6445 • Fax: 630-879-9189 Web: www.vanco1.com...