Daily Procedures - CYBEX FT-360S Owner's And Service Manual

Daily Procedures

Please Review Carefully
When using strong cleaning agents such as rubbing alcohol or bleach, it is advisable to fi rst test in an
inconspicuous area. Other cleaning agents may contain harsh or unknown solvents and are subject to
formula changes by the product manufacturer without notice. Should you desire to use other cleaning
agents, carefully try them in an inconspicuous area to determine potential damage to the material. Never
use harsh solvents or cleaners which are intended for industrial applications. To clean stained or soiled
areas, a soft white cloth is recommended. Avoid use of paper towels.
Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves and eye
protection. Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from
exposure. Use in a well ventilated area. Follow all product manufacturer's warnings. Cybex and its
vendors cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning
products.
1. Frames - Wipe down frame using a mild solution of warm water and car wash soap. Be sure to dry
thoroughly. AVOID acid or chlorine based cleaners and also cleaners containing abrasives as these
could scratch or damage the equipment.
2. Chrome - Clean chrome tubes, fi rst using chrome polish and then using a car wax seal. Neutral
cleaners with a pH between 5.5 and 8.5 are recommended. Be sure to dry thoroughly. AVOID acid
or chlorine based cleaners and also cleaners containing abrasives as these could scratch or damage
the equipment.
3. Front Panel - The following techniques for cleaning the FT -360S front pane are based on standard
industry practice. To ensure acceptability of results, always test a sample of the material with the
cleaner and technique to be used.
Guidelines for cleaning front panel:
• Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing.
• Follow up the application with warm water rinse.
• Don't use abrasives or high alkaline cleaners.
• Don't leave cleaners on for long periods, wash immediately.
• Don't apply cleaners in direct sunlight or at elevated temperatures.
• Don't use scrapers, squeegees or razors.
• Don't clean with gasoline.
Maintenance
Page 7-2
Cybex FT-360S Functional Trainer Owner's Manual