Warning/Caution Decals - CYBEX FT-360S Owner's And Service Manual

Facility Safety Precautions
• Read the Owner's Manual carefully before assembling, servicing or using the equipment.
• Securely anchor each machine to the fl oor using the anchor holes provided in each machine.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8" grade 2 bolts
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
• Make sure that each machine is set up and operated on a solid level surface.
equipment on an uneven surface.
• Make sure that all users are properly trained on how to use the equipment.
• Make sure there is enough room for safe access and operation of the equipment.
• Perform regular maintenance checks on the equipment. Also pay close attention to all areas
most susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.
• Immediately replace worn or damaged components. If unable to immediately replace worn or
damaged components then remove from service until the repair is made.
• Use only Cybex supplied components to maintain/repair the equipment.
• Keep a repair log of all maintenance activities.
• Inspect all cables and belts and connections prior to use.
frayed, or damaged.
NOTE: It is the sole responsibility of the user/owner or facility operator to ensure that regular
maintenance is performed.

Warning/Caution Decals

Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor
or moderate injury.
The warning and caution decals are shown on the following page. The diagrams following the decals
show where each decal is located.
Safety
Page 1-2
Cybex FT-360S Functional Trainer Owner's Manual
professional contractor.
or better).
leg or frame not in contact with surface using fl at washers.
Do not install
DO NOT use if any components are worn,