Technical Data; All Device Versions; Rated Conditions - Siemens SIPART PS2 Operating Instructions Manual

Technical data

7.1

All device versions

7.1.1

Rated conditions

Rated conditions
Ambient conditions
Ambient temperature
• Permissible ambient temperature for operation
• Maximum permissible height above sea level
• Relative humidity
Degree of pollution
Overvoltage category
Degree of protection
1)
Vibration resistance
• Harmonic oscillations (sine) according to
IEC 60068-2-6
• Bump (half-sine) according to
IEC 60068-2-27
• Noise (controlled digitally) according to
IEC 60068-2-64
• Recommended range of continuous operation of the entire
control valve
Climate class
• Storage
• Transport
Max. impact energy 1 Joule for enclosure with inspection window 6DR5..0 and 6DR5..1 or max. 2 Joule for 6DR5..3
1)
2) At ≤ -10 °C (≤ 14 °F) the display refresh rate of the indicator is limited.
The following applies to order suffix (order code) -Z M40: -40 ... +80 °C (-40 ... +176°F)
3)
See also
Proper mounting (Page 19)
Ambient temperature (Page 62)
SIPART PS2 (6DR5...)
Compact Operating Instructions, 11/2022, A5E03436620-AG
For use indoors and outdoors.
In hazardous areas, observe the maximum permissible am‐
bient temperature corresponding to the temperature class.
-30 ... +80 °C (-22 ... +176 °F)
2)3)
Up to 2000 m
0 ... 100%
2
II
IP66 / Type 4X to UL 50E
3.5 mm (0.14"), 2 ... 27 Hz, 3 cycles/axis
98.1 m/s² (321.84 ft/s²), 27 ... 300 Hz, 3 cycles/axis
150 m/s² (492 ft/s²), 6 ms, 1000 shocks/axis
10 ... 200 Hz; 1 (m/s²)²/Hz (3.28 (ft/s²)²/Hz)
200 ... 500 Hz; 0.3 (m/s²)²/Hz (0.98 (ft/s²)²/Hz)
4 hours/axis
≤ 30 m/s² (98.4 ft/s²) without resonance peak
According to IEC/EN 60721-3
1K5, -40 ... +80 °C (-40 ... +176 °F)
2K4, -40 ... +80 °C (-40 ... +176 °F)
7
57