Inductive Limit Switches (Ils) 6Dr4004-6G / -8G - Siemens SIPART PS2 Operating Instructions Manual

Technical data
7.4 Option modules
• Static destruction limit
Signal 10 V
• Rated signal range
• Internal resistance R
i
• Static destruction limit
Supply and signal power circuits
7.4.4

Inductive Limit Switches (ILS) 6DR4004-6G / -8G

Limit encoder with slotted initiators
and fault message output
2 slotted initiators
• Digital output 1: Terminals 41 and 42
• Digital output 2: Terminals 51 and 52
• Connection
• Signal state High
(not triggered)
• Signal state Low (triggered)
• 2 slotted initiators
• Function
• Connecting to circuits with the fol‐
lowing peak values
Effective internal capacitance
Effective internal inductance
1 fault message output
• Digital output: Terminals 31 and 32
• Connection
• Signal state High
(not triggered)
72
Without explosion
protection
6DR4004-8F
40 mA
0 ... 10 V
25 kΩ
20 V
Galvanically connected with the basic device
Without explosion pro‐
tection
6DR4004-8G
2-wire technology in accordance with EN 60947-5-6 (NAMUR), for switching amplifi‐
NC contact (NC, normally closed)
Rated voltage 8 V, power
consumption:
≥ 3 mA (limit not activa‐
ted),
≤ 1 mA (limit activated)
-
-
At switching amplifier in accordance with EN 60947-5-6: (NAMUR), U
R = 1.1 kΩ
With explosion protec‐
tion
Ex "ia", "db ia", "ic"
6DR4004-6F
With explosion protec‐
tion Ex "ia", "db ia"
6DR4004-6G
ers connected on load side
> 2.1 mA
< 1.2 mA
Type SJ2-SN
U ≤ DC 15 V
i
I ≤ 25 mA
i
P ≤ 64 mW
i
C ≤ 161 nF
i
L ≤ 120 μH
i
1 kΩ).
> 2.1 mA
Compact Operating Instructions, 11/2022, A5E03436620-AG
With explosion protec‐
tion
Ex "ec", "tb"
6DR4004-6F
-
-
-
-
With explosion protec‐
tion Ex "ic", "ec", "tb"
6DR4004-6G
"ic":
U ≤ DC 15 V
i
I ≤ 25 mA
i
"ec"/"tb":
U ≤ DC 15 V
n
P ≤ 64 mW
n
C ≤ 161 nF
i
L ≤ 120 μH
i
= 8.2 V, R
Aux i
> 2.1 mA
SIPART PS2 (6DR5...)
=