Siemens SIPART PS2 Operating Instructions Manual page 43

Overview
Parameter Function
1.YFCT Type of actuator
Linear actuator - carrier pin on actuator spindle
Linear actuator - external linear potentiometer
2.YAGL Rated angle of rotation of positioner shaft
3.YWAY 2) Range of stroke (optional setting)
4.INITA Initialization (automatic)
5.INITM Initialization (manual)
Set the transmission ratio selector accordingly.
1)
2) Parameter only appears with "WAY", "-WAY", "ncSLL", and "-ncLL"
If used, the value on the actuator must correspond to the set range of stroke on the lever arm.
3)
Carrier must be set to the value of the actuator travel or, if this value is not scaled, to the next larger scale value.
SIPART PS2 (6DR5...)
Compact Operating Instructions, 11/2022, A5E03436620-AG
Part-turn actuator
Linear actuator
(e.g. with cylinder drives)
Part-turn actuator with NCS/iNCS
Linear actuator with NCS
Linear actuator with NCS/iNCS and lever
3)
Parameter values
Normal
turn
WAY
FWAY
LWAY
ncSt
ncSL
ncSLL
1)
5 | 10 | 15 | 20
(Short lever 33°, range of stroke 5 mm to
(Short lever 90°, range of stroke 25 mm to
40 | 50 | 60 | 70 | 90 | 110 | 130
(Long lever 90°, range of stroke 40 mm to
NOINI | no / ###.# | Strt
NOINI | no / ###.# | Strt
Commissioning
5.4 Parameter
Inverted
-turn
-WAY
-FWAY
-LWAY
-ncSt
-ncSL
-ncLL
33°
90°
OFF
20 mm)
25 | 30 | 35
35 mm)
130 mm)
Unit
Degrees
mm
43