In The Basic Unit With Inductive Limit Switches (Ils) 6Dr4004-6G /-8G (-Z D56); In The Basic Unit With Mechanic Limit Switches (Mls) 6Dr4004-6K (-Z D57); Pneumatic Connection - Siemens SIPART PS2 Operating Instructions Manual

4.2.6.7

In the basic unit with Inductive Limit Switches (ILS) 6DR4004-6G /-8G (-Z D56)

You have a positioner with order suffix -Z order code D56. In this version of the positioner, the
digital outputs A1 and A2 of the Inductive Limit Switches (ILS) are electrically connected to the
M12 device plug.
Table 4-7
Terminal of digital outputs A1 and A2
41 (+)
52 (-)
42 (-)
51 (+)
4.2.6.8

In the basic unit with Mechanic Limit Switches (MLS) 6DR4004-6K (-Z D57)

You have a positioner with order suffix -Z order code D57. In this version of the positioner, the
digital outputs A1 and A2 of the Mechanic Limit Switches (MLS) are electrically connected to the
M12 connector.
Table 4-8
Terminal of digital outputs A1 and A2
41 (+)
52 (-)
42 (-)
51 (+)
4.3

Pneumatic connection

Supply pressure PZ
For safety reasons, the supply pressure PZ can be fed after installation only if the positioner is
switched to "P-Manual mode" when an electrical signal is present. This operating mode is preset
in the delivery state.
Note
Specifications regarding air quality
Observe the specifications regarding the air quality in section "Technical specifications
> Pneumatic data (Page 58)".
SIPART PS2 (6DR5...)
Compact Operating Instructions, 11/2022, A5E03436620-AG
Assignment diagram
Assignment diagram
WARNING
Connecting
4.3 Pneumatic connection
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
Pole designation
1 - Brown
4 - Black
3 - Blue
2 - White
35