Table of Contents
Advertisement
Basic Connections for Cameras and Audio with EasyIP Decoder
Here is an example of a simple EasyIP deployment.
n
Each camera connects to a PoE+ port on the switch. This is the only connection that the cameras
require.
The EasyIP Decoder manages up to four EasyIP cameras and provides hard-wired audio
n
connections for two EasyMic microphones and an analog speaker with amplifier.
The EasyIP Decoder connects directly to a computer as a USB conferencing device.
n
Any model of EasyIP camera may be used.
n
The microphones may be Vaddio TableMIC or CeilingMIC microphones.
n
This diagram shows EasyIP 30 ePTZ cameras and TableMIC microphones.
Installation Guide for the EasyIP 30 ePTZ AV-over-IP ePTZ Camera
5
Advertisement
Table of Contents
