Table of Contents
Advertisement
Read this manual carefully before unit installation and maintenance and keep it for any further future
consultation by the various operators. Do not remove, tear out or rewrite any part of this manual.
Failure to follow these instructions may cause damage and injuries, even fatal, voids
the warranty and relieves the Manufacturer of any liability.
All installation, assembly, electrical connections to the mains and ordinary/extraordinary
only by technicians complying with the legal
requirements,
maintenance must be performed
after turning off the unit and using personal protective equipment (i.e. gloves, protective goggles,
etc.), in compliance with the regulations in force in the country the equipment is to be used in and
the laws on safety in the workplace.
Installation, use or maintenance other than those specified in the manual may cause damage,
injury or death, invalidate the warranty and relieve the Manufacturer of all liability.
Use protective clothing and suitable equipment while handling or installing the equipment, in
order to prevent accidents and safeguard your own and other people's safety. Individuals not
assigned to installation or maintenance are NOT allowed to stand or pass through the work area
while the unit is assembled.
Before carrying out any installation or maintenance, disconnect the equipment from
the power supply and wait at least 120 seconds before carrying out any operation.
Before installing the equipment, check that the systems comply with the legal provisions in
force in the country of use and meet the specifications on the serial number plate.
It is the responsibility of the user/installer to check the static and dynamic stability relative to the
people who are not competent or authorised
installation and to arrange environments so that
DO NOT have access to the unit or to its
controls.
weather conditions
It is the responsibility of the user/installer to make sure that
do not affect
the safety of persons and property during installation, use and maintenance.
Make sure the air intake is not located near any exhausts, flue-gases or other
contaminating elements.
Do not install the equipment in places exposed to strong winds,
salt air or open flames.
After installation is complete, instruct the user on the correct use of the unit.
If the equipment does not work or functional or structural alterations are noted, disconnect it from
the power supply and contact a service centre authorised by the Manufacturer or Retailer, without
attempting to repair it on your own. For any replacements request the use of original spare parts.
Unauthorised actions, tampering or modifications that do not follow the information provided in
this manual can cause damage, injuries or fatal accidents and void the warranty.
The serial number plate on the unit provides important technical information, essential in case of
unit maintenance or repairs. We recommend that you do not remove, damage or modify it.
In order to ensure correct and safe conditions of use, we recommend you have the unit main-
tained and checked at least annually by a service centre authorised by the Manufacturer or Dealer.
6
Advertisement
Table of Contents
