System Operation - Toshiba RBP-RC001-E Installation & Owner's Manual

RBP-RC001-E Installation & Owner's Manual

System operation

When set to Link, a system runs/stops in link with the current operating state of the GR.
When set to Individual, a system is operated on the system operation screen.
For information about switching between Link and Individual, refer to P. 26.
Switching the current operating state
In the case of Link
The system also runs/stops in link with the current operating state of the GR and the operation mode of the operation pattern.
In the case of Individual
In the case of Individual, the system runs/stops with operation on the system operation screen.
All information screen
System information screen
3
System operation screen
1
On the all information screen, press [●] to display the
system information screen.
2
On the system information screen, press [ ] (Control)
to display the system operation screen.
3
Press [<] and [>] to position the cursor on Run and use
[Λ] and [V] to select "Run".
To stop the system, select "Stop".
4
Press [ ] (Return).
The message screen appears.
5
Press [●] (Confirm).
The displayed system enters the operation state and the operation lamp is turned
ON.
25
32RCA001TS-02ISEN