Table of Contents
Advertisement
RBP-RC001-E Installation & Owner's Manual
Clock Setting
• When the power is turned on for the first time or if the power has been shut down for three days or more, the clock may
be initialized (to January 1, 2021). If the clock is initialized, the message below appears. Press the [●] (Confirm) button to
switch to the Clock Setting screen. Be sure to set the clock with the clock setting method.
• If the clock is initialized, no schedules will be executed until the clock is set.
• If the clock is initialized, the schedule settings will also be initialized. (The event settings will not be initialized.)
If you use a schedule, set the schedule again after setting the clock.
Start screen that appears when the clock is initialized
CAUTION
[●]
13
32RCA001TS-02ISEN
Advertisement
Table of Contents
