Toshiba RBP-RC001-E Installation & Owner's Manual page 5

RBP-RC001-E Installation & Owner's Manual
Usage Precautions
Do not operate the switches with wet
hands.
Doing so may cause electric shock or failure.
Prohibited
Do not modify the unit.
A fire or an electric shock may occur.
Prohibited
Do not wet the group remote controller.
Be careful not to get the group remote
controller wet.
Doing so may cause fire, electric shock, or
Prohibited
failure.
Relocation & Repair Precautions
Contact a specialist or the dealer from
whom you purchased the unit to relocate
and re-install the heat source machine.
Faulty installation may cause fire, electric
Request
shock injury.
relocation
Installation Precautions
Do not install in the following locations.
Doing so may cause a failure.
• Locations where combustible gas may leak.
• Locations with high humidity or water.
Prohibited
• Dusty locations.
• Locations in direct sunlight and locations
sublect to high temperatures.
• Locations within 1 m from televisions or
radios.
• Locations where noise is generated.
• Outdoors, under awnings, or other locations
exposed to rain and dew.
• Locations exposed to outside air containing
corrosive gases or salinity.
• Locations with frequent vibrations.
Depending on the installation location, it
may be necessary to install an earth-
leakage circuit breaker.
If the earth leakage breaker is not installed, it
Check the
may cause an electric shock.
installation
location
Usage Precautions
Do not drop the product or apply strong
shock.
Doing so may cause a failure.
Prohibited
Do not start or stop the heat source
machine by turning on / off the power
switch or circuit breaker.
Doing so may cause fire, or electric shock.
Prohibited
Turn off the power if anything is abnormal
(burnt odour etc).
Continued use may cause fire or electric
shock. Please ask the dealer from whom you
Compulsory
purchased the product.
Please ask the dealer from whom you
purchased the unit for repair.
Faulty repair may cause fire or electric shock.
Request
CAUTION
• In instaIIation work, use wiring with the
correct ampacity.
Failure to do so may result in excessive
heat or fire.
Compulsory
• Use specified cables and connect them
securely, and do not subject
connecting terminals to external force.
Doing so may result in broken cables,
excessive heat or fire.
• AIways instaII a circuit breaker on the
primary side of the power supply.
• When attaching to a metal lath, wire
lath or wooden structure with metal
boards, attach it to the control panel,
etc, without attaching it to the wall .
Do not use this device in locations where
children may be present.
Check the
installation
location
When cleaning and checking, turn off the
circuit breaker or the earth-leakage
breaker.
Failing to do so may cause injury.
Compulsory
5
32RCA001TS-02ISEN