Table of Contents
Advertisement
RBP-RC001-E Installation & Owner's Manual
Week Events
From the GR, you can automatically perform events (Run/Stop) at each event time. You can set up to 6 events a day.
If Run/Stop inputs (static signal) are set externally, the external signals are prioritized.
[CAUTION]
Run/Stop according to a schedule can be operated only once at the set time.
1
Use [Λ] and [V] to select "Week Events" and press
[●] (Confirm).
2
Use [<] and [>] to select the desired day of the week and
press [●] (Confirm).
3
Use [Λ] and [V] to select a schedule time and press
[●] (Confirm).
The Input Time screen appears.
4
Use [<] and [>] to select an input digit, use [Λ] and [V] to
change the time, and press [●] (Confirm).
5
Use [<] and [>] to position the cursor on an event
setting item and press [●] (Confirm).
Event switching is now enabled.
6
Use [<] and [>] to select between "Run" or "Stop" and
press [ ] (Return).
7
To confirm the changes, press [ ] (Return) and on the
message screen, press [●] (Confirm).
35
32RCA001TS-02ISEN
Advertisement
Table of Contents
