Maserati GranTurismo 2024 Owner's Manual page 45

Tire Terminology and Definitions
Term
B-Pillar
Cold Tire Inflation Pressure
Maximum Inflation Pressure
Recommended Cold Tire Inflation Pressure
Tire Placard
Definition
The vehicle B-Pillar is the structural member of the body located behind the
front door.
Cold tire inflation pressure is defined as the tire pressure after the vehicle
has not been driven for at least three hours, or driven less than 1 mile (1.6
km) after sitting for a minimum of three hours. Inflation pressure is mea-
sured in units of psi (pounds per square inch) or kPa (kilopascals) or bar.
The maximum inflation pressure is the maximum permissible cold tire infla-
tion pressure for this tire.
The maximum inflation pressure is molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation pressure as shown
on the tire placard.
A label permanently attached to the vehicle describing the vehicle's loading
capacity, the original equipment tire sizes and the recommended cold tire
inflation pressures.
Understanding the Vehicle
2
43