Maserati GranTurismo 2024 Owner's Manual page 167

and speed limits. Those are displayed
by the TSA system on the instrument
cluster display together with a possible
alert when the vehicle exceeds the
speed limit.
See "Traffic Sign Assist - TSA" in
section "Driving and Driver Assistance
Systems" for further details.
• Park Assist
The park assist system will scan for
objects behind and in front of the
vehicle when the transmission is in R
(Reverse), D (Drive) or N (Neutral) mode
and the vehicle speed is less than 7
MPH (11 km/h).
The system can be enabled or turned
"Off". See "Park Assist" in section
"Driving and Driver Assistance
Systems" for further information.
• Park Assist Front Sensors Active in
Drive
If this function is active, when driver
moves from P (Park) or N (Neutral) to
D (Drive) mode, front parking sensors
are activated. If this function is not
active, when driver moves from P (Park)
or N (Neutral) to D (Drive) mode, front
parking sensors are NOT activated.
• Front ParkAssist Volume
When this function is selected, the
chime volume of front park assist
sensors can be set to "Low", "Medium"
or "High" level. "Medium" is the default
setting.
The system will retain its last known
configuration state through ignition
cycles.
• Rear ParkAssist Volume
When this function is selected, the
chime volume of rear park assist
sensors can be set to "Low", "Medium"
or "High" level.
"Medium" is the default setting.
The system will retain its last known
configuration state through ignition
cycles.
• Active Park Braking
When this function is selected, when
the vehicle move backwards in R
(Reverse mode) at a very low speed
and an obstacle is detected, the system
brakes automatically.
• Side Distance Warning
When this function is selected, the
surround screen visualize 4 more arcs
on the vehicle sides in the top view.
• Blind Spot Alert
Activating this function the system
will try to prevent collision between
host vehicle and potential blind spot
collision hazard.
This function can be set in "Off",
"Lights" or "Lights + Chime".
Dashboard Instruments and Controls
See "Blind Spot Assist - BSA" in
section "Driving and Driver Assistance
Systems" for more details.
• Hill Start Assist
By selecting and check-mark this
function, this system provides start
assistance when the vehicle is on an
incline.
Clock & Date
Time is visible on the dashboard smart
clock (see "Smart Clock" in this section)
and on the instrument cluster and on the
MIA display.
With this function it is possible to view
and set the following modes.
• Sync with GPS Time
Time is normally automatically
synchronized with the radio signal.
It is also possible to set automatic
synchronization mode using GPS signal
instead.
• Set Time Hours
With "Sync with GPS Time" function
unchecked and this mode selected, you
can set the hours manually from 1 to 24.
To select, touch the "+" or "–" soft-keys
to adjust the hours.
• Set Time Minutes
With "Sync with GPS Time" function
unchecked and this mode selected, you
can set the minutes manually from 0 to
4
165