Maserati GranTurismo 2024 Owner's Manual page 146

Dashboard Instruments and Controls
value is represented as dashes "--.-".
Exceeding the maximum scale limit, the
instantaneous numerical value shall be at
least the upper limit of the scale.
TRIP A / TRIP B (when active)
Trip displays data of user's voyage. Trip
A format is identical to Trip B except
for the fact that Trip A is set as default,
Trip B not (It is possible to enable it from
MIA Display. See "Functions of Settings
Menu on MIA" in this section). The trip
area displays the following parameters:
4
• Trip A or Trip B label
• Trip distance
• Trip timer
• Average trip consumption
NOTE:
• Distance, elapsed time, average
consumption and average speed can
be reset only on Main Menu Screen.
After a reset, or if the signal is not
144
available, the value of the related items
should be replaced with a dash "-" for
each digit, except for the elapsed time
that will restart from 00:00.
• Cluster displays "- -" in place of value
for Average Trip consumption and Trip
Distance if cluster does not receive
signal.
TORQUE MANAGEMENT
Instantaneous engine torque is
represented by the filling of the gauge
near each wheel. If the signal is not
available the graphic is grayed out.
The widget shall have 50% of torque on
the front axle (25% for each wheel) and
100% on rear axle (50% maximum for
each rear wheel) as a maximum value.
The arrows shall follow the current
Torque value (example: if torque is 0, no
arrow is shown).
TIRE PRESSURE
Tire Pressure page shows the current
inflation of each tire. The units of
measurement will be converted
coherently with the current settings
(see "Functions of Settings Menu on
MIA" in this chapter). The car graphics
will vary according to the model
and version. If a warning on a tire is
present, the corresponding tire will be
yellow highlighted with the current
underinflated pressure value.