Maserati GranTurismo 2024 Owner's Manual page 110

Before Driving
3
Memory Profiles Setting
NOTE:
Saving a new memory profile will erase
an existing profile from memory
To create a new memory profile, perform
the following:
• Cycle the ignition device to ON .
• Adjust all memory profile settings to
desired preferences (i.e., seat, side
mirrors, power tilt and telescopic
steering column, and radio station
presets).
• Long press and release one of the three
memory soft-keys.
After these steps, the profile set will be
memorized in the selected position.
NOTE:
Memory profiles can be set without the
vehicle in P (Park), but the vehicle must
be in P (Park) to recall a memory profile
108
Pairing Remote Keyless Entry
Transmitter to Seats Memory
Your key fob can be programmed to
recall one of three programmed memory
profiles by pressing the button on the
key fob.
NOTE:
This function can be enabled or
disabled using the MIA system, refer to
"Functions of Setting Menu on MIA" in
section "Dashboard Instruments and
Controls" for further information.
To program your key fobs, perform the
following actions:
• Cycle the ignition device to ON
position.
• Put the key fob on the spot inside the
rear central tunnel compartment, under
the armrest.
• Move the seat and/or the other
adjustable devices in the position that
you wish to memorize, or recall a
previously memorized profile, pressing
the corresponding memory "M1", "M2"
or "M3".
• Press and release the desired memory
soft-key "M1", "M2" or "M3" for 3
seconds.
• Press and release the button on the
key fob.
To check if the system has memorized
the correct profile, you can move the
seat and press the button: the seat
will move to the memorized position.
Memory Position Recall
NOTE:
The vehicle must be in P (Park) to
recall memory positions. If a recall is
attempted when the vehicle is not in P
(Park), a message will display in the
instrument cluster.
To recall the memory settings for driver,
press memory soft-key "M1", "M2" or
"M3" on the Comfort Display or the
button on the key fob linked to memory
position "M1", "M2" or "M3" with ignition
device in ON position.
A recall can be canceled by pressing
any of the icons (M1", "M2" or "M3")
during a recall. When a recall is canceled,
the driver seat, external side mirrors
and power tilt and telescopic steering
column stop moving.
A delay of at least one second will occur
before selecting a new recall.
Easy Entry/Exit Driver Seat
This function provides automatic driver
seat positioning to enhance driver
mobility when entering and exiting the
vehicle.
The distance the driver seat moves
depends on where you have the driver