Maserati GranTurismo 2024 Owner's Manual page 249

When FCW status for some reason
changes in off, the corresponding amber
warning light on instrument cluster will
light on.
This warning light informs the driver that
FCW is disabled. This warning light will
light even when the activation of another
driver assistance function or drive mode
disables the FCW.
NOTE:
The FCW system setting chosen by
the User is kept in memory only for the
current ignition cycle.
System Setting
FCW warning can be set in "On", "Off" or
"Warning".
The default status of FCW sensitivity
is the "Med (Medium)" setting. When
the active braking function ("Forward
Collision Warning") setting is on, the
system warns you of a possible collision
with the vehicle in front of you when you
are farther away and it applies limited
braking. When in "Near" setting, this
gives you the most reaction time to
avoid a possible collision.
Changing the sensitivity status to the
"Near" setting, allows the system to
warn you of a possible collision with
the vehicle in front of you when you are
much closer. This setting provides less
reaction time than the "Warning & Active
Braking" sensitivity setting, which allows
for a more dynamic driving experience.
"Med" is the intermediate status
between the two described above.
NOTE:
• The default values shall appear at every
new ignition cycle: Sensitivity = "Med"
and Status = On.
• FCW may not react to irrelevant
objects such as objects not in the path
of the car, stationary objects that are
far away, oncoming traffic, on cross
traffic vehicles, or leading vehicles with
the same or higher rate of speed.
• The active braking (autonomous
braking/braking aid) will not engage in
case of potential collision with static
object such as guard rails, walls, etc..
• If PEB setting is present in the setting
list, it can be set on in "warning +
active braking"; if PEB setting is not
Driving and Driver Assistance Systems
present in the setting list, it is always
active.
• If FCW is set off on the MIA screen,
but PEB setting is in "warning + active
braking", the active brake will still be
active.
Changing the FCW status to "Off"
inhibits the system from providing
limited autonomous braking or additional
brake support if the driver is not braking
adequately in the event of a potential
frontal collision.
In this state the system disables the
brake jerk.
Limited Operation and Service
Warning
The messages indicating on display
the limited functionality or service at
Authorized Maserati Dealer required
are the same as for the ACC system. For
further details, refer to "Adaptive Cruise
Control - ACC" in this section.
NOTE:
• The adjustment of the sensor could be
affected by strong shocks or light
collisions. This could affect the system
by reducing the systems performance
or could increase the false positive
rate. The adjustment of the radar
system has to be proved or a new
5
(Continued)
247