Maserati GranTurismo 2024 Owner's Manual page 189

The Comfort Display shows the relevant
soft-keys to set these modes individually
for each zone.
Available settings are as follows:
• "Dashboard" mode
Air for each zone flows from four
adjustable vents of the dashboard and
two positioned at the rear end of the
central tunnel. Each of these vents
can be singly adjusted. The air grids
or vanes of the vents can be moved
to adjust air flow direction. A setting
wheel, placed near each vent, allows to
regulate or close the airflow.
• "Bi-Level" mode
Air for each zone flows from the
dashboard and central tunnel
adjustable vents and from the fixed
floor vents described in "Floor" mode.
NOTE:
Bi-Level mode is designed to let cooler
air come in the dashboard and rear part
of the central console vents and warmer
air from the floor vents.
• "Floor" mode
Air for each zone flows from the
fixed front vents, located under
the dashboard. A small portion of
the airflow is directed through the
defrost/demist vents to prevent
windows fogging.
• "Mix" mode
Air for each zone flows from the
defrost/demist vent, the fixed vent
under the dashboard and which from
floor vent described in "Floor" mode.
This mode is recommended for cold
climates, to improve comfort and
prevent windows fogging.
• "Defrost" mode
Air for each zone flows from the
dashboard defrost/demist vents to
prevent windows fogging.
• "Hi-Level" mode
Air for each zone flows from the
dashboard defrost/demist vents, from
the dashboard and central tunnel
adjustable vents.
• "Tri-Level" mode
Air for each zone flows from all the
adjustable/fixed and defrost/demist
vents and from the fixed floor vents
described in "Floor" mode.
14. "SYNC" mode
Touch the "SYNC" soft-key on the
Comfort Display to switch the Sync
function on/off. The "SYNC" soft-key
illuminates in amber when this function
is selected. This function is used to
synchronize the passenger temperature
setting with the driver temperature
setting.
Changing the passenger temperature
setting while in "SYNC" will
automatically exit this function.
Dashboard Instruments and Controls
15. Climate air flow
With AUTO function on, the air flow can
be set in three different ways: Intense,
Normal and Gentle.
16. Driver's heated seat
Touch the soft-key on the Comfort
Display to activate the seat heating. The
seat is provided with three levels of
heating. Every level is represented by the
number of arrows on the seat image and
red lines nearby.
Select the level of seat heating by
touching more than once the soft key.
17. Passenger's heated seat
Touch the soft-key on the Comfort
Display to activate the seat heating. The
seat is provided with three levels of
heating. Every level is represented by the
number of arrows on the seat image and
red lines nearby.
Select the level of seat heating by
touching more than once the soft key.
18. Driver's ventilated seat (if equipped)
Touch the soft-key on the Comfort
Display to activate the seat ventilation.
The seat is provided with three levels of
ventilation. Every level is represented by
the number of arrows on the seat image
and blue lines nearby.
Select the level of seat ventilation by
touching more than once the soft key.
19. Passenger's ventilated seat (if
equipped)
4
187