Electronic Logging Device (Eld) - PREVOST H3-45 2023 Operator's Manual

xiv - Foreword

ELECTRONIC LOGGING DEVICE (ELD)

This vehicle is equipped with a dedicated ELD interface connector located under the lower left part of the
dashboard. This SAE J1939 9 PIN connector is compatible with most FMCSA approved ELD and will ensure
that the ELD will not interfere with the vehicle communication, diagnostic and/or driving systems.
Please take note that the OBD connector is only intended as a diagnostic equipment connection.
Installing an aftermarket plug-in device that uses the OBD port may cause interference and/or damage to the
vehicle systems, potentially affecting safe operation.
Both connectors (OBD and ELD) are clearly identified under the dash by stickers. The OBD port must
remain unconnected at all times except during vehicle maintenance (using Prevost approved
diagnostic equipment only).
Connecting aftermarket equipment to the OBD connector may lead to:
Incorrect emission monitoring and failure to meet the requirements of emission tests.
l
Erratic behaviour of one or more of the vehicle safety devices/driving aids, increasing the risk of
l
accidents.
False code readings and inconsistency during vehicle diagnostic procedures, increasing vehicle down
l
time.
Unreliable ELD connection/recording and potential violations with the federal ELD regulations*.
l
* For more information regarding Federal ELD requirements, consult the
PA-1652 Operator's Manual H3-45 Coach
FMSCA