5-30 Other Features
3. Engage either keyed release shaft with the pump
handle.
4. Rotate the keyed release shaft ¼-turn (as indicated on
adjacent
decal)
simultaneously.
FIGURE 14: DECAL
5. Grasp the top edge of the front rollstop with two hands
and pull firmly. The platform moves smoothly after an
initial resistance. Pull platform straight out to the end of
its travel.
CAUTION
Ensure that release shaft re-engages and locks when
platform is fully extended. If release shaft does not
engage, use manual pump handle and turn ¼- turn
(direction opposite to orientation shown on adjacent
decal) to re-engage release shaft.
6. Lift right handrail to vertical and push firmly down into its
socket. Repeat for left handrail.
while
lifting
stow
PA-1652 Operator's Manual H3-45 Coach
lock
lever