PREVOST H3-45 2023 Operator's Manual page 103

You should stop the vehicle as soon as
possible and check your tires.
Other Messages
Indicates a malfunction of an antenna.
Indicates a malfunction of a pressure and
temperature sensor.
Tire Pressure And Temperature Readings
Through TIRE MONITOR Application
The tire pressure and temperature readings are
displayed in the DID. The user can scroll through
the menus to get detailed information and inflate
or deflate the tires to bring them back to their
optimum pressure.
To do so,
1. On the right-hand steering keypad,
press the Home button.
2. Press the Application Tray button.
3. Scroll down to TIRE MONITOR
using the scroll wheel (rocker type)
and press Enter / Select button.
4. Use the scroll wheel (rocker type) to
select the appropriate axle and
read the values.
FIGURE 34: READING FRONT AXLE TIRE PRESSURE
AND TEMPERATURE VALUES (DISPLAY EXAMPLE)
Pressure or temperature irregularities are
displayed as shown bwlow.
FIGURE 35: READING PRESSURE AND
TEMPERATUREON ON FRONT AXLE TIRES WITH
IRREGULARITIES DETECTED (DISPLAY EXAMPLE)
(1) A higher or lower than normal pressure or
temperature value is highlighted by a yellow
rectangle surrounding the abnormal value. The
corresponding tire will be displayed in yellow.
When a pressure or temperature critically
exceeds the normal value, a red square
surrounds the abnormal value to bring attention.
The corresponding tire will be displayed in red.
Changing The Target Pressure On A Specific
Axle
To change the target pressure on a specific axle,
proceed as follow:
PA-1652 Operator's Manual H3-45 Coach
Controls and Instruments 4-47
1. On the right-hand steering keypad,
press the Home button.
2. Press the Application Tray button.
3. Scroll down to TIRE MONITOR
using the scroll wheel (rocker type)