PREVOST H3-45 2023 Operator's Manual page 156

5-24 Other Features
Hand-Held Control Pendant And Motion
The lift is operated with a hand-held, hard-wired remote-control pendant. Turn on the
POWER ENABLE switch and then control each lift motion by pressing an appropriate
button.
The POWER ENABLE switch provides power to the pendant and thereby enables the lift.
When turned on, the power switch and each button illuminate.
Pressing the DEPLOY/OUT button extends the platform from the lift storage
compartment, and pressing the STOW button retracts the platform back into the storage
compartment. Pressing the DOWN button lowers the platform towards the ground, and
pressing the UP button raises the platform towards the vehicle floor.
A button must be held depressed until the motion is completed. Movement of the platform
can be halted at any time by releasing the button.
MOTION
FIGURE 10: PLATFORM POSITION WITH INTERMEDIATE HEIGHT (OPTIONAL FEATURE)
Platform extends out of vehicle, or deploys.
DEPLOY
/ OUT
Platform lowers from present height towards ground; front rollstop
DOWN
lowers when platform contacts ground
Platform rises from present height towards vehicle floor; rollstop
UP
rises before platform leaves ground.
STOW / Platform retracts into vehicle, or stows.
IN
PA-1652 Operator's Manual H3-45 Coach
DESCRIPTION
FIGURE 9: HAND-
HELD CONTROL
PENDANT