Scanning Features; Scan Mode - Datalogic Quickscan QD2200 Product Reference Manual

SCANNING FEATURES

Scan Mode

Selects the scan operating mode for the reader. Selections are:
Trigger Single:
ing occurs:
•Stand Mode/Object Detection has elapsed
•a label has been read
•the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is
pulled, scanning starts and the product scans until the trigger is released, or a label is
read, or the maximum Stand Mode/Object Detection has elapsed.
Trigger Hold Multiple :
scans until the trigger is released or Stand Mode/Object Detection has elapsed. Reading
a label does not disable scanning. Double Read Timeout prevents undesired multiple
reads of the same label while in this mode.
Trigger Pulse Multiple:
until Stand Mode/Object Detection has elapsed or the trigger has been released and
pulled again. Double Read Timeout prevents undesired multiple reads of the same label
while in this mode.
Flashing:
controlled by Flash On Time and Flash Off Time. When Flash is ON the reader reads con-
tinuously. When Flash is OFF scanning is deactivated.
Always On:
Double Read Timeout prevents undesired multiple reads of the same label while in this
mode.
Stand Mode:
ically when an item is placed in reader's field of view.
Trigger Object Sense:
the decoder.
1. Controlled by Flash On Time.
When the trigger is pulled, scanning is activated until one of the follow-
When the trigger is pulled, scanning starts and the product
When the trigger is pulled, continuous scanning is activated
1
The reader flashes on and off regardless of the trigger status. Flash rate is
No trigger pull is required to read a bar code. Scanning is continually on.
No trigger pull is required to read a bar code. Scanning turns on automat-
It is similar to Stand Mode. A trigger pull is required to activate
SCANNING FEATURES
PRODUCT REFERENCE GUIDE
165