Bradley Express SS Series Installation Instructions Manual

Lavatory system

Hide thumbs Also See for Express SS Series:

Installation manual (27 pages)

Installation instructions manual (17 pages)

Installation manual (15 pages)

Quick Links

Download this manual

SS-1/IR Express® Lavatory

System shown with optional

trap cover

215-1090 Rev. H; EN 02-808B

Page 1 of 16

IMPORTANT

Read this entire installation manual to

ensure proper installation.

Flush all the water supply lines before

making connections.

File these instructions with the owner

or maintenance department.

Installation

Instructions

SS-1/IR

SS-1/BIR

SS-1 (bowl only)

Express® Lavatory

System SS-Series

Pre-Installation Information . . . . . . . . . . . . . . . . . . . .2

Lavatory System Components . . . . . . . . . . . . . . . . . .3

Lavatory System Dimensions . . . . . . . . . . . . . . . . . . 4

Installation Instructions . . . . . . . . . . . . . . . . . . . .5-14

Check Valve Troubleshooting . . . . . . . . . . . . . . . . .14

Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . .15

Vernatherm™ Thermostatic Mixing Valve . . . . . . .16

P.O. Box 309, Menomonee Falls, WI 53052-0309

TEL. 1-800-BRADLEY

http://www.bradleycorp.com

FAX 262-251-5817

Need help?

Do you have a question about the Express SS Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Bradley Express SS Series

Page 1: Table Of Contents
Flush all the water supply lines before making connections. File these instructions with the owner or maintenance department. P.O. Box 309, Menomonee Falls, WI 53052-0309 215-1090 Rev. H; EN 02-808B TEL. 1-800-BRADLEY FAX 262-251-5817 Page 1 of 16 http://www.bradleycorp.com...
Page 2: Pre-Installation Information
1. This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any Bradley unit or part thereof which our inspection shall show to have been defective within the limitations of this war- ranty.
Page 3: Lavatory System Components
FUTURA 900 SINGLE OPERATION FAUCET CONTROL BOX S67-219 SPRAYHEAD COVER SPRAYHEAD BODY TRANSFORMER FOR SPRAYHEAD ASSEMBLY (269-617) WITH MALE TEMPERED LINE OPTION DISCONNECTS (269-622) STOP/STRAINER CHECK VALVE S60-003 1/2" PIPE NIPPLE (113-006DH) Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 4: Lavatory System Dimensions
OPTIONAL TRAP COVER 34"* (864) 29"* 28"* 8-1/2" (737) (711) (216) 16-1/8" (410) FLOOR 17" (432) 19-1/8"* (486) FLOOR *Subtract 4" from vertical dimensions for compliance with ADA guidelines for children's use. Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 5: Installation Instructions
NOTE: If trap cover is supplied, refer to rough-in requirements shown in the Front View on page 4. Standard Height Mounting *Subtract 4" from vertical dimensions for compliance with ADA guidelines for children's use. Figure 1a Installation Instructions continue . . . Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 6 Express® Lavatory System SS-Series SS-1/IR, SS-1/BIR and SS-1 (bowl only) Installation Instructions Installation Instructions continued . . In-Wall Carrier Mounting Figure 1b Surface-Mounted Bracket Mounting Figure 1c Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 7 2. Use 1/4" screws (supplied by installer) and washers (supplied by Bradley) to attach the backplate weldment to the wall (refer to Figure 1c). 3. Screw the two locking devices (supplied by Bradley) into the carrier arm at the center 1/4-20 tap location shown in Figure 2b on page 8 (one locking device per arm).
Page 8 Express® Lavatory System SS-Series SS-1/IR, SS-1/BIR and SS-1 (bowl only) Installation Instructions Installation Instructions continued . . . Figure 2b Figure 2c Figure 2d Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 9 (142-002BS) (269-617) WITH MALE PROXIMITY VALVE DISCONNECT (S07-040) (269-622) HOOK & LOOP FASTENER (P10-569) SPRAYHEAD BODY SENSOR (269-1608) HOOK & LOOP FASTENER (P10-569) FLEXIBLE FEMALE HOSE CONNECTORS (269-1365) MALE CONNECTORS Figure 3a Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 10 HOSE THERMOSTATIC MIXING VALVE STOP/CHECK VALVE FLEXIBLE (S60-003) SUPPLY HOSES 1/2" PIPE NIPPLE CONNECT CONNECT (113-006DH) TO 1/2" TO 1/2" NPT COLD NPT HOT WATER WATER SUPPLY SUPPLY Figure 3c Figure 3d Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 11 3. Connect the flexible hoses installed to the Vernatherm™ valve to the hot and cold water supply piping from the wall. 900 FUTURA FAUCET (OPTIONAL) ELECTRICAL OUTLET BRACKET/U-BOLT VERNATHERM™ MIXING VALVE) HOT SUPPLY STOP/CHECK VALVE STOP/CHECK VALVE COLD SUPPLY Figure 3e Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 12 1/2" coupling located on the Vernatherm valve. Attach the female end of the 1/2" flexible hose to the 1/2" male fitting on the battery box using the fiber washer attached to the hose. Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 13 3. Assemble the P-trap by connecting the 1-1/2" tubular pipe to the tailpiece and to the 1-1/2" drain pipe stubbed out of the wall. P-TRAP Figure 4 Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 14: Check Valve Troubleshooting
3. Remove the flexible hoses from the stop/check valves and clean the strainers, if necessary. 4. Inspect mixing valve for proper installation (see Vernatherm valve on page 16). • A red marking indicates the hot inlet. Bradley Corporation • 215-1090 Rev. H; EN 02-808B...
Page 15: Cleaning And Maintenance
• Repair kit: In the unlikely event your Terreon® surface becomes damaged, it can easily and inexpensively be repaired. Contact your Bradley representative to order a repair kit and be sure to specify color when ordering.
Page 16: Vernatherm™ Thermostatic Mixing Valve
No Water Cold Valve shuts off or drips Correct Correct Cold Cold Cold Reversed Cold Cold/below 107° Hot/above 107° Reversed No Water Reversed No Water Cold Cold Reversed Reversed Cold Cold Cold Bradley Corporation • 215-1090 Rev. H; EN 02-808B...

This manual is also suitable for:

Express ss-1/ir Express ss-1/bir Express ss-1