How To Set The Real-Time Clock - ABB REU 610 Operator's Manual

REU 610
Main Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
Fig. 4.1.8.-1 Selecting language
4.1.9.
20
Voltage Relay
Operator's Manual - ANSI Version
Group Menu
CONFIGURATION
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
MEMORY SETTINGS
FREQUENCY
U NOMINAL
PASSWORD HMI
TIME
TRIP CIRCUIT SUP
The list of languages in the language selection menu differs
depending on the HMI language set number in the order number.

How to set the real-time clock

The real-time clock used for time-stamped events is set via two different
settings, one for Year-Month-Day and another for Hours-Minutes-Seconds.
To change one setting or both settings:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\TIME and press
3. Use or to select the parameter to be edited.
4. Press to enter the setting mode and give the password if required. If the
default password 999 is still valid, no password is required.
5. The first digit of the setting value of the parameter to be edited starts to
flash. Use and
decrease the value. The setting range (for example Year or Minutes) is
shown on the right-hand side of the second line of the display.
6. To store a new value and return the display to the view mode, press
7. To exit the setting mode without storing the changes, press
confirming and the display is returned to the view mode.
8. Press to return the display to the idle mode.
Parameter Menu
CONFIGURATION
ENGLISH
ESPANOL
PORTUGESE
to move the cursor and
1MRS755971
Confirm
Cancel
A051585
.
and to increase or
.
once before