ABB REU 610 Operator's Manual page 33

1MRS755971
Main Menu Group Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
SETTINGS
PROTECT. ELEMENTS
SGF
SGB
CONFIGURATION
SGR
INFO
Fig. 4.2.2.2.-3 Settings for switchgroups
Voltage Relay
Operator's Manual - ANSI Version
SGB1...SGB5 Digital inputs (DI1...DI5)
SGR1...SGR8 Output contacts (PO1, PO2, PO3, SO1, SO2, SO3, SO4, SO5)
SGL1...SGL8 Programmable LEDs
To set functions via switchgroups:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select the main menu group SETTINGS and the
wanted switchgroup menu (for example SGF), and press
3. Use or
display settings) and press
to select setting group 1 or 2 (GRP1 or GRP2). The active
4. Use or
setting group is indicated by an asterisk "*".
5. Press to enter the setting mode and give the password if required.
6. Use or to select the bit to be set, and
bit state, see Fig. 4.2.2.2.-4.
7. Press to confirm the selection. After confirmation, the display returns
to the view mode and shows the checksum of the switchgroup.
8. Press to return the display to the idle mode.
SGL
GROUP 1/GROUP 2
NEW TRIP IND.
DEMAND SETTINGS
to select the wanted switchgroup (for example SGF2 for
.
Parameter Menus
SETTINGS
SGF1 :000
SGF2 :0000
SGF3 :00
SGF4 :0000
SGF5 :000
SETTINGS
SGB1 :0000
SGB2 :0000
SGB3 :0000
SGB4 :0000
SGB5 :0000
SETTINGS
SGR1 :0000
SGR2 :0000
SGR3 :0000
SGR4 :0000
SGR5 :0000
SETTINGS
SGL1 :0000
SGL2 :0000
SGL3 :0000
SGL4 :0000
SGL5 :0000
SGL6 :0000
SGL7 :0000
SGL8 :0000
REU 610
.
or to select the wanted
SETTINGS
* GRP 1 :000 Edit/Confirm
GRP 2 :000
Cancel
SETTINGS
* GRP 1 :0000
GRP 2 :0000
SETTINGS
* GRP 1 :0000
GRP 2 :0000
SETTINGS
* GRP 1 :0000
GRP 2 :0000
A051638
33