How To Reset The Trip Lockout Function - ABB REU 610 Operator's Manual

1MRS755971
Main Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
Fig. 4.1.9.-1 Setting the real-time clock
4.1.10.
Voltage Relay
Operator's Manual - ANSI Version
Group Menu
CONFIGURATION
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
MEMORY SETTINGS
FREQUENCY
U NOMINAL
PASSWORD HMI
TIME
TRIP CIRCUIT SUP

How to reset the trip lockout function

The trip lockout function is used to prevent accidental closing of the circuit
breaker after a trip. The trip lockout function must be locally reset with a
separate reset before the circuit breaker can be closed again.
Reset the trip lockout as follows:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select OPERATION\TRIP LOCKOUT
\LOCKOUT RESET.
3. Press to enter the setting mode. The second line starts to flash.
4. Press to reset trip lockout.
5. Press to return the display to the idle mode.
REU 610
Parameter Menu
CONFIGURATION
YY-MM-DD (00-23)
hh.mm;ss (00-59)
Confirm
Cancel
A051588
21