How To Set The Real-Time Clock - ABB REF 610 Operator's Manual

REF 610 REF 610
Main Menu
MEASUREMENTS
RECORDED DATA
OPERATION
SETTINGS
CONFIGURATION
INFO
Fig. 4.1.8.-1 Selecting language
4.1.9.
22
Feeder Protection Relay
Operator's Manual - ANSI Version
5. Press to confirm the selection. The selected language is shown on the display.
6. Press to return the display to the idle mode.
By pressing before confirming the selection, the former language remains active
and the display is returned to the view mode. Pressing
to the idle mode.
Group Menu
CONFIGURATION
FUNCTION TEST/DI
COMMUNICATION
LANGUAGE
MEMORY SETTINGS
FREQUENCY
HMI PASSWORDS
TIME
TRIP CIRCUIT SUP
STORE COUNTER
The list of languages in the language selection menu differs depending
on the HMI language set number in the order number.

How to set the real-time clock

The real-time clock used for time-stamped events is set via two different settings,
one for Year-Month-Day and another for Hours-Minutes-Seconds.
To change one setting or both settings:
1. Press an arrow button to access the main menu.
2. Use the arrow buttons to select CONFIGURATION\TIME and press
3. Use or to select the parameter to be edited.
4. Press to enter the setting mode and give the password, if required. If the
default password 999 is still valid, no password is required.
again returns the display
Parameter Menu
CONFIGURATION
ENGLISH
ESPAÑOL
PORTUGUÊS
1MRS755539
Confirm
Cancel
A070063
.