1. Throttle cables
2. Brake hose (front brake master cylinder to
hydraulic unit)
3. ABS test coupler
4. Hydraulic unit assembly
5. Headlight lead
6. Starting circuit cut-off relay 1
7. Headlight relay
8. Radiator fan motor relay
9. Turn signal/hazard relay
10. Wire harness
11. Brake hose (hydraulic unit to rear brake caliper)
12. Front wheel sensor lead coupler
13. Brake hose (hydraulic unit to front brake caliper)
14. Main switch
15. Fuse boxes
16. Right handlebar switch lead
17. Left handlebar switch leads
18. Starting circuit cut-off relay 2
19. Fuel pump relay
A. Route the handlebar switch leads to the inside of
the meter cover, and then fasten the leads with a
plastic locking tie.
B. Inside
C. Outside
2-44
CABLE ROUTING