Removing The Front Fork Legs; Disassembling The Front Fork Legs - Yamaha MBK XMAX 2014 Service Manual

Hide thumbs Also See for MBK XMAX 2014:

Table of Contents

REMOVING THE FRONT FORK LEGS

The following procedure applies to both of the

front fork legs.

1. Stand the vehicle on a level surface.

Securely support the vehicle so that there is

no danger of it falling over.

Place the vehicle on a suitable stand so that the

front wheel is elevated.

• Cap bolt "1"

If the cap bolt is difficult to loosen, slightly loosen

the lower bracket pinch bolts "2".

• Lower bracket pinch bolts "2"

Before loosening the lower bracket pinch

bolts, support the front fork leg.

The following procedure applies to both of the

front fork legs.

Stroke the inner tube several times while drain-

ing the fork oil.

• Dust seal "1"

• Oil seal clip "2"

Do not scratch the inner tube.

• Damper rod bolt "1"

• Copper washer

• Damper rod

While holding the damper rod with the damper

rod holder "2" and T-handle "3", loosen the

damper rod bolt.

(with a flat-head screwdriver)

Damper rod holder

Damping rod holder set

T-handle 3/8" drive 60 cm long

Table of Contents

Mbk evolis 2014 Yp250r 2014 Yp250ra 2014